1 - 3
INTRODUCTION
32DSKF02.D
TITANIUM S-SERIES AND K-SERIES
PUBLIC USE SERVICE MANUAL
JUNE 2021
C.
SHIPMENT
INFORMATION
•
When the product is received, unpack the product and check for freight damage. Claims for damage should be
made to the freight carrier immediately.
•
Be sure the installation kit contains all items listed on the kit packing list. Please report any missing items immedi-
ately to Ricon Product Support.
•
The warranty and owner registration cards must be completed and returned to Ricon within 20 days to validate the
warranty.
NOTE:
The Sales or Service personnel must review the Warranty and this Operator Manual with the user to be certain
that they understand how to safely operate the product and instruct the user to follow the operating instructions
without exception.
D.
GENERAL
SAFETY
PRECAUTIONS
The following general safety precautions must be followed during installation, operation, and maintenance:
•
Under no circumstances should installation, maintenance, repair, and adjustments be attempted without the imme-
diate presence of a person capable of rendering aid.
•
An injury, no matter how slight, should always be attended. Always administer first aid or seek medical attention
immediately.
•
Protective eyeshields and appropriate clothing should be worn at all times.
•
To avoid injury, always exercise caution when operating and be certain that hands, feet, legs, and clothing are not
in the path of product movement.
•
Batteries contain acid that can burn. If acid comes in contact with skin, flush affected area with water and wash with
soap immediately.
•
Always work in a properly ventilated area. Do not smoke or use an open flame near a battery.
•
Do not lay anything metallic on top of a battery.
•
Check under vehicle before drilling to avoid drilling into frame, subframe members, wiring, hydraulic lines, fuel lines,
fuel tank, etc.
•
Read and thoroughly understand the operating instructions before attempting to operate.
•
Inspect the product before each use. If an unsafe condition is noted, such as unusual noises or movements, do not
use lift until the problem is corrected.
•
Never load or stand on the platform until installation is complete. Upon completion of installation, test load the lift to
100% of its rated load capacity.
•
Stand clear of doors and platform and keep others clear during operation.
•
The product requires regular periodic maintenance. Inspections are recommended at the intervals prescribed in
chapter three. The product must be maintained at the highest level of performance.
•
Only one (1) control pendant can safely operate the wheelchair lift at any time. Do not control wheelchair lift with
two control pendants simultaneously.
