18
Particles can finally be removed with compressed air. The final cleaning of the
PowerVat with compressed air must not be carried out in the SolFlex 3D printer as
this may lead to unwanted contamination in the printer.
Please note that cleaning may need to be done on both the inside (film) and the
bottom (glass) of the PowerVat. After cleaning the vat is ready for use. It is
recommended to handle the PowerVat by holding it only at the grips located on
the sides of the vat to avoid further contact with the film or the glass surfaces.
After selecting the vat type
PowerVat
under
Vat Type
in the
JOG MODE
menu,
initialize the printer (
JOG MODE
→
Initialize
).
Insert the PowerVat like illustrated below.
1
2
