16
This section is only applicable if the FlexVat has been previously installed.
During the print job, an automatic locking mechanism is engaged to securely lock
the PowerVat in place. After the print job, the vat is released and can be removed.
To enable this function, the 4 clamping bolts of your SolFlex 3D printer must be
equipped with the supplied locking discs
[5]
. Use the 4 supplied M5x16
countersunk screws
[11]
.
1.
First, remove the building platform and platform cover of your SolFlex 3D
printer and move the z-stage to the lower end position for better access to
the clamp bolts. To achieve this, use the
JOG MODE
on the touch screen
and select
Move To Bottom
.
2.
As soon as the printer has reached its final position, mount the 4 locking
discs
[5]
on the clamping bolts of the printer. Use the 4 countersunk screws
M5x16
[11]
and the 3
mm hex wrench.
11
5
Hex wrench 3
mm
