VWR Puranity TU 12 UV+ Instruction Manual Download Page 4

Page: 4 / 84

Puranity TU+

VWR

Explanatory notes on the operating instructions

EU Mark of Conformity

CAUTION
Indicates a situation which, if not avoided, could result in damage to equipment or property.

WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious
injuries.

DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injuries.

NOTE!
Is used for applicational hints and useful information.

Risk of electric shock. Electrical work on the system is only to be carried out by qualified
personnel.

Protective conductor connection
Connect the power supply to an electrical socket with a protective connection.

Indicates a situation in which protective gloves or clothing must be worn.

Indicates a situation in which protective goggles must be worn.

Indicates a situation in which breathing protection must be used.

Summary of Contents for Puranity TU 12 UV+





















































































Search results

Summary of Contents for Puranity TU 12 UV+

Reviews:

Related manuals for Puranity TU 12 UV+

Brands by name

Popular brands

VWR Puranity TU 12 UV+, Instruction Manual

Search results

Summary of Contents for Puranity TU 12 UV+

Reviews:

Related manuals for Puranity TU 12 UV+

Brands by name

Popular brands