38
Set alert schedule as always on
The default setting of sensors’ alert schedule is
Always on
.
You will receive an announcement alert - “
Sensor X* is open
”
or
“
Motion X* sensor detected motion
”, every time a monitored
garage door,
in-house door, window, or medicine cabinet is opened, or
there is motion in the monitored area.
You can also set a reminder in case you forget to close the
monitored object. You can choose to receive an alert once
again if it remains open after 15, 30, or 60 minutes.
Press
SENSORS
on the handset or telephone base when idle, and then press
or
on the handset, or
CALLER ID /
or
PHONEBOOK/
on the telephone
base to scroll to the desired sensor.
-OR-
i. Press
MENU
when the phone is not in use.
ii. Press or
on the handset, or
CALLER ID /
or
PHONEBOOK/
on the
telephone base to scroll to
Sensors
, and then press
SELECT
.
iii. Press or
on the handset, or
CALLER ID /
or
PHONEBOOK/
on the
telephone base to scroll to the desired sensor, and then press
SELECT
.
2. Press
OPTIONS
to enter the individual sensor menu.
3. Scroll to choose
Alert schedule
schedule
, and then press
SELECT
.
4. Press
SELECT
to select
Always on
. The reminder menu appears.
5. Scroll to choose
Off
,
15 minutes
,
30 minutes
, or
60 minutes
, and then press
SELECT
to save.
NOTES
When you received the alert tone and announcement, the handset will display
Sensor X
is open
or
Motion X detected motion
, whilst the telephone base will display
Sensor X is
open
or
Motion X sensor detected motion
.
For garage door sensor and open/closed sensor, both the handset and telephone base
will also display , and the
SENSOR
light on the telephone base will turn red.
1.
•
•
*
Sensor X
or
Motion X
refer to the sensor’s name.
X
refers to the system
-
assigned number of the sensor. You can edit the sensor’s name to your
preferred name. See
Rename the sensor
on page 43.
Set schedule
Open/closed 1