76
The sensor does not
work at all.
Make sure batteries are installed.
Check if the
SENSORS
softkey is displayed on the idle screen of the
telephone base or handset. If yes, press
SENSORS
and then scroll to
check if the desired sensor is on the sensor list. If the desired sensor is
not found, then it may be deregistered from the telephone base.
Press
MENU
on the telephone base when idle.
Scroll to
Sensor setup
, and then press
SELECT
.
Scroll to
Add new sensor
, and then press
SELECT
. The screen
displays
For sensor pairing process, see manual
.
Press
NEXT
after you initiated the pairing process at your sensor.
Refer to the online User’s manual of
VC7151
/
VC7152
, or the User’s
manual that comes with your new sensor, to register the sensor to
the telephone base.
1.
2.
3.
4.
The sensor may be out of range. Move the sensor closer to the
telephone base.
I cannot receive alerts
when the monitored
garage door, in-house
door, window, or
medicine cabinet is
opened.
Make sure the sensor alert system is in armed mode and that
L
or
R
appears on the display.
If the icon does not appear on the display, press
ARM
to turn on the
sensor alert system.
For various alerts behavior, please check the settings of alert
notifications (page 41) and individual sensors’ alert schedule (page 37
to 40).
I want to replace an old
sensor with a new one.
To replace a sensor, you must deregister the registered sensor first,
and then register the new sensor to your ULE compatible product.
Press
MENU
when the phone is not in use.
Enter the code
*33734#
to access the
DEREGISTER
menu.
Scroll to
Single sensor
, and then press
SELECT
.
Scroll to the sensor you want to deregister, and then press
SELECT
.
Press
YES
to confirm the deregistration.
The telephone base shows
SENSOR X is deregistered
and you
hear a beep when the deregistration process completes.
1.
2.
3.
4.
5.
The answering system
does not announce the
correct day of the week
for recorded messages
time stamp.
Make sure you have set the date and time. See
Configure your
telephone
section.
The answering system
does not answer after
correct number of rings
or does not record
messages.
Make sure the answering system is on. When the answering system
is on, the telephone base and handset show
ANS ON
and the
/ANS
ON
light on the telephone base is on.
If toll saver is selected, the number of rings
changes to two when there are new messages.
I accidentally set my
LCD language to
Spanish or French,
and I don’t know how
to change it back to
English.
While the handset is not in use, press
MENU
and then enter
364
to
change the handset LCD language back to English.
