manualshive.com logo in svg

VTech VC7151, User Manual

Share
Download
VTech VC7151 User Manual Download Page 14

6

•  Press to display the 

PUSH TO TALK

 (PTT) menu to begin a PTT call when 

the phone is not in use.

•  Press and hold to begin a one-to-group PTT call.
•  Press and hold while talking in a PTT call.

11 – MENU/SELECT

•  While in a menu, press to select an item; or save an entry or setting.

12 – VOLUME/ /

•  Review the phonebook when the phone is not in use.
•  Increase the listening volume during a call or message playback.
•  Scroll up while in a menu, or in the phonebook, caller ID log, or redial list.
•  Move the cursor to the right when entering numbers or names.

        VOLUME/ /CID

•  Review the caller ID log when the phone is not in use.
•  Decrease the listening volume during a call or message playback.
•  Scroll down while in a menu, or in the phonebook,  

caller ID log, or redial list.

•  Move the cursor to the left when entering numbers or names.

13 – OFF/CANCEL

•  Hang up a call.
•  Silence the ringer temporarily while the handset is ringing.
•  Press and hold to erase the missed call indicator while the phone is not in 

use.

•  Press to return to the previous menu, or press and hold to return to idle 

mode, without making changes.

14 – ARM/DISARM

•  Press to turn on or off the sensor alert system.

15 – Microphone

Summary of Contents for VC7151


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands