manualshive.com logo in svg

VTech VC7151, User Manual

Share
Download
VTech VC7151 User Manual Download Page 21

13

Display icons overview

Handset icons

Battery status

 - battery is charging (animated display).

Battery status

 - the battery icon flashes when the battery is low and 

needs charging.  

Speakerphone 

- the handset speakerphone is in use.

Ringer off

 - the handset ringer is off.  

New voicemail

 - you have new voicemail from your telephone service 

provider.

ANS  

ON

Answering system on

 - the answering system is turned on to answer 

calls. 

Message

 - you have new message in the built-in answering system.

Search bar icon

 - appears when in the phonebook menu.

ECO

ECO mode

 - activates automatically to reduce power consumption when 

the handset is within range from the telephone base.

NEW

New caller ID log

 - displays in caller ID log when there are new missed 

calls.

MISSED

Missed alerts in sensor log

 - displays in sensor log when there are new 

missed alerts from sensors.

##/##

Index - 

shows the entry number of the sensor status, or in the sensor log, 

phonebook, caller ID log, or call block list that is currently being viewed, 
out of the total number of entries.

MUTE

MUTE

 - the handset microphone is off.

Sensor

 - the garage door, in-house door, window, or medicine cabinet is 

opened.

Missed alerts in idle mode

 - displays in idle mode when there are new 

missed alerts from sensors.

L

Armed local mode

 - displays when the sensor alert system is turned on, 

and is set to receive alerts locally. Alerts are received on the telephone 
system only.

R

Armed remote mode

 - displays when the sensor alert system is turned 

on, and is set to receive alerts remotely. Alerts are received at the stored 
telephone numbers. 

Summary of Contents for VC7151


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands