manualshive.com logo in svg

VTech VC7151, User Manual

Share
Download
VTech VC7151 User Manual Download Page 58

50

Mute

The mute function allows you to hear the other party but the other party cannot 
hear you.

1.  During a call, press 

MUTE

 on the handset or telephone base. The screen 

displays 

Muted

 until the mute function is turned off.

2. Press 

MUTE

 again to resume the conversation. The screen briefly displays 

Microphone ON

.

Call waiting

When you subscribe to call waiting service from your telephone service provider, 
you hear an alert tone if there is an incoming call while you are on another call. 

Press 

FLASH

 to put the current call on hold and take the new call.

Press 

FLASH

 to switch back and forth between calls.

Find handset

Use this feature to find all system handsets.

To start paging:

Press 

/FIND HANDSET

 on the base. All idle handsets 

ring and display 

** Paging **

.

To mute paging:

Press 

MUTE

, 

MUTE

, 

CANCEL

, or

 

 on the handset.

To end paging:

Press 

/FIND HANDSET

 or 

STOP

 on the base.

-OR-

Press  ,  , or any dialing key on the handset.

NOTE

Do not press and hold 

/FIND HANDSET

 for more than four seconds. It may lead to 

handset deregistration. 

•
•

•

•

•

•

•

Summary of Contents for VC7151


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands