VTech VC7151 User Manual Download

Page: 24 / 97

Installation setup

Telephone installation

You can choose to connect the telephone base for desktop usage or wall mounting.

NOTES

Use only the adapters provided.
Make sure the electrical outlets are not controlled by wall switches.
The adapters are intended to be correctly oriented in a vertical or floor mount position.

The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-

the-table or cabinet outlet.

TIP

If you subscribe to digital subscriber line (DSL) high-speed Internet service through your

telephone line, make sure you install a DSL filter (not included) between the telephone

line cord and telephone wall jack. Contact your DSL service provider for more information.

Connect the telephone base

Connect the charger

•
•
•

•

Summary of Contents for VC7151


































































































Search results

Summary of Contents for VC7151

Reviews:

Related manuals for VC7151

Brands by name

Popular brands

VTech VC7151, User Manual

Search results

Summary of Contents for VC7151

Reviews:

Related manuals for VC7151

Brands by name

Popular brands