VTech ErisTerminal ET635 Page 118 User Manual Download

Page: 118 / 119

118

ET635 User Manual

Appendix 4

Forward all

All incoming calls will be forwarded to another extension or an external phone number. After

turning call forwarding on with this key, the display will prompt you to enter - or confirm/change a

previously entered - forwarding number.

Help

Displays the URL of the phone's web interface and the URL to the VTech web page. The IP address,

MAC address, and firmware version can be found in the phone menu:

Settings

Information

System Information

Hold

Placing the active call on hold.

LDAP Directory

Allows the user to look up a remote directory while dialing. Once set, this pressed key will open

up the Direcory Search window. If LDAP is setup, corresponding matching entries as returned by

the sever will be shown. If LDAP is not used and and presence_lookup_number setting is turned

on, the contact matches will be shown. The default edit mode is alphanumeric in this state.

Logoff Identities

Caution: This option will delete all account settings!!
Usage: Mainly useful for call centers with frequently changing users.

Calling up the settings menu of the phone.

Missed Calls

Missed call history list.

Monitor Calls

When the phone has been programmed to monitor extensions and do/allow call pickup, a key can

be mapped to show the list of monitored extensions and do call pickup from the monitor.
The list will show only active extensions (i.e., busy or ringing). When there is no activity on any

monitored extensions, the list is empty.

Mute

Mutes/unmutes the microphone (handset, speakerphone, headset) during active call.

Next Outgoing ID

Selecting the next identity as the outgoing identity.

Presence State

Providing access to a list where the Presence state of each registered SIP Identity can be defined

(online, offline, busy, invisible).

Prev. Outgoing ID

Selecting the previous identity as the outgoing identity.

Reboot

Rebooting the phone.

Record

The phone does not record the voice streams at all; they must be recorded on the PBX or other

external device. Pressed during a call, the key informs the PBX to start and stop the recording of

the audio stream on the PBX. While the call is being recorded, the recording symbol will either

blink on the display or be displayed, in red , in the status line, depending on the phone type; if

the function key has an LED, the LED will be lit throughout the recording. Please be advised that

you must respect the legal restrictions of your country for recording calls with or without the

participants' knowledge and permission.

Redial

Dialed call history list (last call at the top).

Retrieve

Retrieves new mailbox messages. This key becomes active when the phone has received a

message waiting indication (MWI) with a valid mailbox URI.

Status Messages

Currently available status messages (see "Appendix 2 - Status Messages" on page 111

Transfer

Transfering the active call or an incoming call that you do not want to pick up.

See

"Transferring calls" on page 65

Pressing the key will put the "Enter number" screen on the display.
Enter the number and press

to complete the transfer.

Summary of Contents for ErisTerminal ET635
























































































































Search results

Summary of Contents for ErisTerminal ET635

Reviews:

Related manuals for ErisTerminal ET635

Brands by name

Popular brands

VTech ErisTerminal ET635, User Manual

Search results

Summary of Contents for ErisTerminal ET635

Reviews:

Related manuals for ErisTerminal ET635

Brands by name

Popular brands