VTech ErisTerminal ET635 Page 96 User Manual Download

Page: 96 / 119

ET635 User Manual

Customizing the Phone Settings

all forwarding

This feature automatically redirects all or certain incoming calls to another phone or a mailbox. Call forwarding

is configured for each identity separately. On the web interface, the settings are configured on the

Identity

(1-12) pages. If you set call forwarding on the phone, the settings are applied to the identity selected as the

outgoing identity at the time of the configuration; the configuration must be repeated with the same or

different settings for each identity.

Always

All incoming calls are forwarded to the number of the phone, extension, or mailbox specified as this function's

target.

When busy

Calls ringing while the phone is busy are forwarded to the number of the phone, extension, or mailbox specified

as this function's target.

After timeout

When a call starts ringing, the phone will wait for the number of seconds specified as "call forwarding time".

If the call has not been accepted by the end of this time period, it is forwarded to the number of the phone,

extension, or mailbox specified as this function's target.
When a call starts ringing, the phone will wait for the number of seconds specified as "call forwarding time".

If the call has not been accepted by the end of this time period, it is forwarded to the number of the phone,

extension, or mailbox specified as this function's target.

Configuring the settings on the phone

See

"Making/changing the settings on the phone and turning on call forwarding" on page 73

Configuring the settings on the web interface

If your internet telephony provider or your PBX uses codes to turn functions on and off, refer to their manuals

for the codes to enter in "On Code"/"Off Code" text fields or ask your administrator.

Setting forwarding numbers

•

Forwarding all incoming calls:

1. Open

Identity

(1-12) page >

Features

tab >

Call Forwarding

Always

Type the phone number in the "Target" text field. Type each number the way it needs to be dialed by

the phone, without spaces or punctuation between the digits.

Click

Apply

and click

Save

•

Forwarding incoming calls when the phone is busy:

1. Open

Identity

(1-12) page >

Features

tab >

Call Forwarding

Busy

Type the phone number in the "Target" text field. Type each number the way it needs to be dialed by

the phone, without spaces or punctuation between the digits.

Click

Apply

and click

Save

Summary of Contents for ErisTerminal ET635
























































































































Search results

Summary of Contents for ErisTerminal ET635

Reviews:

Related manuals for ErisTerminal ET635

Brands by name

Popular brands

VTech ErisTerminal ET635, User Manual

Search results

Summary of Contents for ErisTerminal ET635

Reviews:

Related manuals for ErisTerminal ET635

Brands by name

Popular brands