14
ET635 User Manual
Setting up the Phone
2.
Push the footstand upwards onto the slideguides until they lock in place.
3.
Plug the short end of the handset cord into the connector on the handset.
4.
Place the phone on an even, horizontal surface.
W
all mounting
"Appendix 3 - Wall Mounting" on page 112
R
otating the tab of the cradle
The phone is delivered with the tab level with the inner edge of the cradle. If you are going to mount the phone
on a wall, we recommend that you rotate the tab 180°. After rotation, the tip of the tab will protrude slightly
above the edge of the "cradle". The small rectangular hole in the receiver casing fits perfectly over the now
protruding tip, holding the receiver safely in place in the upright position on the wall.
Fig. 1
Fig. 2
Fig. 3
1.
Slide the plastic tab from the cradle (Fig. 1)
2.
Rotate the tab 180°.
3.
Slide the tab back into the cradle (Fig. 2). The top of the tab now protrudes slightly above the inner edge of
the cradle (Fig. 3), so that it will hold the handset more securely.
