VTech ErisTerminal ET635 Page 16 User Manual Download

Page: 16 / 119

ET635 User Manual

Setting up the Phone

•

Plug one end of the Ethernet (network) cable into the RJ45 connector labeled “NET” and the other end into

the network side to establish a data link.

If PoE is not available, insert the plug of the power supply into the connector labeled "5V DC" and hook up

the plug to the wall outlet.

•

The second RJ45 connector, labeled “PC”, is for daisy-chaining further Ethernet devices without the need for

a second Ethernet connection line.

onnecting a headset

You can use wired as well as wireless headsets with the phone.

•

Wired headsets

If you want to use a wired headset, connect it to the RJ audio jack labeled

Note:

If both a wired and a wireless headset are connected to the phone, incoming calls will go

to the wireless headset.

•

Wireless headsets

◦ Connecting the base station of your headset via the VTech EHS Adapter.

Please refer to the Quick Start Guide of the VTech EHS Advanced that came with the device.
Please refer to the manual of your wireless headset for further information on how to connect the

VTech EHS Advanced and the headset.

◦ Connecting the headset to the phone via a Bluetooth-compatible adapter.

Insert the adapter into the USB port of the phone. Enter the parameters of the headset manually on the

phone's web interface at >

Advanced

Audio

> text field of "Audio parameters".

Summary of Contents for ErisTerminal ET635
























































































































Search results

Summary of Contents for ErisTerminal ET635

Reviews:

Related manuals for ErisTerminal ET635

Brands by name

Popular brands

VTech ErisTerminal ET635, User Manual

Search results

Summary of Contents for ErisTerminal ET635

Reviews:

Related manuals for ErisTerminal ET635

Brands by name

Popular brands