background image

59

ET635 User Manual

 

Using the Phone

• 

Press   / 

 to turn off call completion for this call (Fig. 2). 

• 

 Press   / 

 if you wish to dial another number while waiting for call completion (Fig. 2). You can now 

hang up the handset to return to the idle screen (Fig. 3); use handset, headset, or speakerphone to dial 

another number; receive calls etc. Call completion will not interfere with the normal operation of your 

phone.

When the number becomes available, you will see it announced on the display (Fig. 4) and hear a double beep 

if you are in a call. 

• 

Press   / 

 to dial.

• 

Press   / 

 to turn off call completion for this call. 

Number guessing (auto completion)  

Note:  

The default setting for Number guessing is "off". To be able to use it, open the phone's 

web interface to the 

Advanced Settings

 page > 

Behavior

 tab > 

Phone Behavior

 section, change 

the setting to "on", and enter the minimum number of characters that must be entered before 

number guessing will start. 

When number guessing is enabled, the phone will propose numbers containing the typed string from the 

numbers saved on its call lists and in the directory as soon as you have typed the minimum number of digits. 

 

If and when the desired number is on the display, press   to dial.

In the following example, the minimum number of characters is four:

   

Summary of Contents for ErisTerminal ET635
























































































































Reviews: