VTech ErisTerminal ET635 User Manual Download

Page: 45 / 119

ET635 User Manual

Directories

irectories

irectory

The directory is the built-in directory of the phone. It can hold up to 1,000 entries. Entries can be added and

edited on the phone and on the web interface.

Any changes you make on the web interface will not take effect until you click

Save

or click

Apply

and

Save

depending on your firmware version. Changes will be lost if you open another page of the web interface

without first clicking on

Apply

Save

Definitions, explanations

Directory entries

Each entry must have at least one phone number; multiple associated phone numbers are possible. If you

do not enter a first and/or last name and/or nickname, the phone number will appear under both "Name"

and "Number".

•

Entry with one phone number:

•

Entry with several associated phone numbers:

Name area.

Same data for

the master record and all

subentries.

Info area.

Data can be diff erent

for each associated phone

number. If subentry textf ields

are blank, the data from the

master record is displayed.

Info area of Subentry 2: Diff erent "Group" selecti on (S),

diff erent entry in textf ield of "Email" (S). No entry in text fi elds

of "Title" and "Organizati on", therefore same as Master Record.

Number area (N):

Individual

setti ngs for the master record

and each subentry possible.

Subentry 1

Master record (M)

Subentry 2

Summary of Contents for ErisTerminal ET635
























































































































Search results

Summary of Contents for ErisTerminal ET635

Reviews:

Related manuals for ErisTerminal ET635

Brands by name

Popular brands

VTech ErisTerminal ET635, User Manual

Search results

Summary of Contents for ErisTerminal ET635

Reviews:

Related manuals for ErisTerminal ET635

Brands by name

Popular brands