manualshive.com logo in svg

VTech ErisTerminal ET635, User Manual

Share
Download
VTech ErisTerminal ET635 User Manual Download Page 56

56

ET635 User Manual

 

Using the Phone

U

sing the phone  

This section describes the functions of the phone with the factory default settings. If your phone was installed 

and/or set up by someone else, the default settings may have been changed. Please check with that person or 

company if the phone does not react as described here.
The caller information displayed on the screen is controlled by a setting on the phone‘s web interface. The 

default setting is "Name Number". You can change the setting at the 

Preferences

 tab > 

Appearance

 tab > 

General Information

 section > "Number Display Style" by selecting a different option from the drop-down list. 

M

aking calls  

See 

"Entering numerals, letters, special characters, and symbols" on page 27 for information on input modes 

and entering letters, numerals, and special characters. 

Selecting identity for current outgoing call  

See 

"Identities/accounts" on page 89 on how to configure identities.

If more than one identity is shown on the display, the one on the white bar with the white 

and green rings around the green circle is the outgoing identity for the call and the number/

name that will show on the callee’s phone. Use the up or down arrow on the navigation key 

to select another identity.

Using different audio devices  

Handset  

• 

Pick up the handset, enter the phone number, and press 

 OR  

• 

enter the phone number and pick up the handset.

Headset  

Enter the phone number and press 

. 

Speakerphone  

Enter the phone number and press 

.

Handset or headset and casing speaker  

With dual audio mode activated, other persons present in the room are allowed to listen in to the third party 

over the phone's casing loudspeaker. 

1. 

Use the method for handset or headset use to dial.

2. 

 When the call has been established, press 

 to enable the casing loudspeaker. Press 

 to turn the 

speaker off.

Summary of Contents for ErisTerminal ET635
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands