VOTI XR3D, Operator'S Manual

Page: 5 / 118

Operator Manual / 1. Introduction 5
1. Introduction
The objective of this manual is to provide users with an overview of the key functions of the XR3D. The information
will demonstrate how to operate the system and conduct a security scan.
This manual provides a description of the user interface with instructions to help the user perform operations quickly
and easily. The instructions are provided in numbered steps with screenshots showing how to accomplish the task.
To facilitate understanding, the following conventions are used:

NOTE
Provides general information that emphasizes or supplements points in the main text.

IMPORTANT
Provides important information that emphasizes or supplements points in the main text.
To operate the XR3D, you must be logged in as an operator. The security permissions are set in the administration
module by the administrator or supervisor.
The sections in this manual are as follows:
l
Section 1. Introduction : Provides an overview of the machine, manual, and key terms and guidelines.
l
Section 2. Safety : Covers important safety information that must be read before operating the machine.
l
Section 3. Getting started
: Explains how to power the system on, perform an initial system check, and do shift
changes.
l
Section 4. Interface : Describes the main controls and information found on the operator interface.
l
Section 5. Conducting a scan : Details the full scanning process, from logging in to retrieving archived images.
l
Section 6. Administration module
: Provides detailed information about the settings in each tab of the
administration module.
l
Section 7. TIP management : Explains how to use TIP (Threat Image Projection).
l
Section 8. Training module
: Explains how to use the TIP Operator Training module.
© VOTI 2020 / 900116-001