VOTI XR3D Operator'S Manual Download Page 80

Page: 80 / 118

Operator Manual / 6. Administration module

6.4 Archive Management

The

Archive Management

tab sets the parameters determining how the system processes scanned item images.

Figure 71 - Admin Menu - Archive Management

Save Archive

– The default is

, meaning the scanner saves all scanned item images. If

Save Archive

is set

OFF

, the scanner does not save any scanned item image.

Continuous Archive Display

– When

, all the archived images are displayed continuously in archive mode.

Clicking on only the left arrow in this mode displays a tape of the archive.

Continuous Archiving

– Used in conjunction with continuous screening mode, this saves images as separate

files instead of multiple objects scanned simultaneously in a single image.

Selected HDD

– Used to select where the archive will be saved on the computer or network).

Summary of Contents for XR3D























































































































Search results

Summary of Contents for XR3D

Reviews:

Related manuals for XR3D

Brands by name

Popular brands

VOTI XR3D, Operator'S Manual

Search results

Summary of Contents for XR3D

Reviews:

Related manuals for XR3D

Brands by name

Popular brands