De-stoning machine EP 1000
Version: 136401000_M0014772F_EN400/50D
Datum: 15.01.2021
- 20 / 40 -
4.4 Tightening the V-strap
Picture 4.4-1)
Checking the strap tension
1) Remove protective cover (Fig.Pos.1).
2) Loosen lock nut (Fig.Pos.2).
3) Adjust motor cradle (Fig.Pos.3) using the tightening screw (Fig.Pos.4).
The motor will move up or down depending on the direction the tightening screw is
turned in and the strap (Fig.Pos.5) will be tightened or slackened as a result.
4) Check strap tension.
5) If necessary slacken the strap again
– to do this repeat step 3.
6) Tighten screw nut (Fig.Pos.2) again.
7) Replace the protective cover (Fig.Pos.1).