De-stoning machine EP 1000
Version: 136401000_M0014772F_EN400/50D
Datum: 15.01.2021
- 11 / 40 -
1.7 Remnant risks
Reasonably foreseeable, incorrect
use/risk
Remnant risk
Measures
Not maintaining of the safety
regulations, as described in the
documentation or the Operating Manual
Any failure of safety devices, all
forms of risk possible
Additional note on the machine/line
about the observation of specified
safety regulations
Servicing and maintenance work on the
machine/line, while it is not in a safe
condition, e.g. the mains electricity has
not been switched off, etc.
All forms of risk possible!
For operator training see Operating
Manual
Not observing the safety measures in
setting up the machine/line
All forms of risk possible, e.g.
loose mechanical parts
For operator training see Operating
Manual
Catching of clothing in moving
mechanical parts during servicing or
repair work
All forms of risk possible!
Starting up of the machine/line only
with assembled safety covers;
Regulation clothing, operator training
Standing beneath hanging loads
The endangering of the ground
personnel is possible from
falling loads
Wear safety helmets; observe safety
notes for servicing and repair work;
staff training
Neglect of personal protection
equipment in normal operation and
servicing and maintenance work
All forms of danger to staff are
possible!
For operator training see Operating
Manual; use personal protection
equipment if required, but without fail
if this is required by the protection
regulations! (gloves, facial protection
and earmuffs, protective helmet etc.)
Straining the body through incorrect
manual lifting
Permanent damage to the spine
and joints of the hand
Use of suitable permitted lifts
Risk areas
Risk areas must be constantly marked by means of warning plates, coloured markings or other clear indicators.
WARNING AGAINST GENERAL DANGERS
- The presence of persons during operation in risk areas
is prohibited!
- A functional test of all
safety devices must be carried out before re-starting of line!
- It must be assured before switching the main switch and the control power,
that there are no persons in the risk areas.