Volvo XC 90 2016, Owner'S Manual

Page: 358 / 570

STARTING AND DRIVING
356
NOTE
To access ignition modes I or II without star-
ting the engine, the brake pedal must not be
depressed when these modes are selected.
•
Ignition mode I : Turn the start knob to
START
and release it. The knob will return
automatically to its original position.
•
Ignition mode II : Turn the start knob to
START and hold it there for approx.
4 seconds. Release the knob.
•
Returning to ignition mode 0 : To return to
mode 0 from mode II or I , turn the start knob
to
STOP
and release it.
Related information
•
Starting the engine (p. 356)
•
Turning the engine off (p. 359)
Battery drain
Your vehicle's electrical functions drain the bat-
tery to varying extents.
Avoid using ignition mode II as much as posssi-
ble, or electrical functions that require a great
deal of electrical current when the engine is not
running.
Using ignition mode I whenever possible con-
sumes less electrical current.
Functions that require a great deal of electrical
current include:
•
the climate system blower
•
headlights
•
wipers
•
infotainment system (especially at high vol-
ume).
If the battery's charge level is low, a text message
will appear in the instrument panel. The vehicle's
energy-saving function will then turn off or
reduce certain functions that are currently con-
suming electrical current.
If the battery needs to be recharged, start the
engine and let it idle for at least 15 minutes or
drive the vehicle (driving charges the battery
faster than letting the engine idle).
Related information
•
Ignition modes (p. 355)
Starting the engine
The engine can be started using the start knob
on the tunnel console if there is a remote key in
the passenger compartment.