Volvo XC 90 2016, Owner'S Manual

Page: 251 / 570

DRIVER SUPPORT
249
Activating CC (putting it in active mode
and setting a speed)
–
With the symbol displayed (CC is in
standby mode), press the button (2) on
the left-side steering wheel keypad. The
symbol will change colors from GRAY to
WHITE.
> This puts CC in active mode and sets the
vehicle's current speed.
Related information
•
Cruise Control (CC) (p. 248)
Changing Cruise Control speed
Cruise Control (CC) helps the driver maintain a
set speed.
Changing a set speed
Function buttons and symbols
–
Change a set speed by pressing the (1)
or — (2) buttons briefly or by pressing and
holding them:
•
Press briefly : changes speed in
+/– 1 mph (+/– 1 km/h) increments.
Each press changes the vehicle's speed
by +/– 1 mph (+/– 1 km/h).
•
Press and hold : Release the button
when the set speed indicator (4) has
moved to the desired speed.
If speed is increased by pressing the accelerator
pedal before the
button is pressed, the vehi-
cle's speed when the button is pressed will
become the set speed assuming that the accel-
erator pedal is still depressed when the button is
pressed.
A temporary increase in speed, such as when
passing another vehicle, does not affect the CC
set speed. The vehicle will return to the set speed
when the accelerator pedal is released.
Engine braking instead of applying the
brakes
CC regulates speed by applying the brakes
lightly. To avoid a loss of speed when driving
down hills, use the engine braking function
instead of letting the CC apply the brakes. In this
situation, the driver can temporarily deactivate the
CC braking function.
To do so:
–
Press the accelerator pedal approx. halfway
down and release it.
> CC will automatically deactivate the auto-
matic brake function and will then only
use the engine braking function.
Related information
•
Cruise Control (CC) (p. 248)