Volvo V90 2019, Owner'S Manual

Page: 153 / 674

LIGHTING
}}
151
Position lamps
Position lamps can be used so that other road
users can see the car if it stops or is parked. The
position lamp is switched on with the rotating
ring on the stalk switch.
Stalk switch rotating ring in position lamps position.
Turn the rotating ring to the position - the
position lamps are switched on (number plate
lighting is switched on at the same time).
If the car's electrical system is in ignition position
II then the daytime running lights are switched on
instead of the front position lamps. When the
rotating ring is in this position, the position lamps
are switched on regardless of the ignition posi-
tion of the car's electrical system.
If the car is stationary but running, the rotating
ring can be moved to the position lamp
position from another position to switch on only
the position lamps instead of other lighting.
When driving for more than 30 seconds at max.
10 km/h (approx. 6 mph), or if the speed
exceeds 10 km/h (approx. 6 mph), the daytime
running lights are switched on. The driver should
turn to a position other than
.
If the tailgate is opened when it is dark outside,
the rear position lamps come on (if not already
switched on) to warn road users approaching
from behind. This takes place irrespective of the
position of the rotating ring or the ignition posi-
tion of the car's electrical system.
Related information
•
Lighting control (p. 148)
•
Ignition positions (p. 410)
•
Replacing daytime running light bulb/posi-
tion lamp bulb, front (p. 593)
Daytime running lights
The car has sensors that detect the light condi-
tions in the surroundings. The daytime running
lights are switched on when the rotating ring on
the stalk switch is in position
, or
as well as when the car's electrical system
is in ignition position
II
. In position , the
headlamps change automatically to dipped
beam in weak daylight or darkness.
Stalk switch rotating ring in AUTO position.