Volvo V90 2019, Owner'S Manual

Page: 428 / 674

STARTING AND DRIVING
426
Gear selector inhibitor
The gear selector inhibitor prevents accidental
changing between different gear positions in an
automatic gearbox.
There are two different types of gear selector
inhibitor - mechanical and automatic.
Mechanical gear selector inhibitor
The gear selector can be moved forward and
back freely between
N and D . Other positions are
locked with a latch that is released with the inhib-
itor button on the gear selector.
With the inhibitor button depressed the lever can
be moved forwards or backwards between
P , R ,
N and D .
Automatic gear selector inhibitor
The automatic gear selector inhibitor has special
safety systems.
From park position - P
To select a gear position other than the P posi-
tion, the brake pedal must be depressed and the
ignition position must be
II .
From neutral position - N
If the gear selector is in the N position and the
car has been stationary for at least 3 seconds
(irrespective of whether the engine is running)
then the gear selector is locked.
To be able to move the gear selector from the N
position to another gear position, the brake pedal
must be depressed and the ignition position must
be
II .
Related information
•
Gear positions for automatic gearbox
(p. 423)
•
Deactivate automatic gear selector inhibitor
(p. 426)
Deactivate automatic gear selector
inhibitor
If there is no power to the car, the automatic
gear selector inhibitor can nevertheless be dis-
engaged.
If the car cannot be driven, e.g. due to a dis-
charged battery, the gear selector must be
moved to the
N position so that the car can be
moved.
Lift the rubber mat in the compartment in
front of the gear selector. Locate the hole
with a spring-loaded button in the bottom of
the compartment.
Press a small screwdriver into the hole and
hold.
Move the gear selector to position N and
release the button.
4. Put the rubber mat back in place.