Volvo V90 2019, Owner'S Manual

Page: 299 / 674

DRIVER SUPPORT
}}
297
Activating and starting Cruise
Control
The cruise control function (CC
28
) must first be
selected and activated in order to be able to reg-
ulate the speed.
Set cruise control in standby mode
To set cruise control in standby mode:
–
Press
◀
(1) or
▶
(3) to browse to the sym-
bol/function (4).
> The symbol is shown and the cruise con-
trol can then be activated.
Activating/starting cruise control
In order to start the cruise control from the
standby mode, the car's current speed must be
30 km/h (20 mph) or higher. The lowest speed
that can be stored is 30 km/h (20 mph).
To start the cruise control:
–
With the symbol/function displayed,
press the steering wheel button (2).
> Cruise Control starts and the current
speed becomes the stored speed.
NOTE
Cruise Control cannot be enabled at speeds
below 30 km/h (20 mph).
Related information
•
Cruise control (p. 295)
•
Deactivating cruise control (p. 299)
•
Deactivate cruise control and set it in
standby mode (p. 297)
•
Reactivating cruise control from standby
mode (p. 298)
Deactivate cruise control and set it
in standby mode
Cruise control (CC
29
) can be temporarily deacti-
vated so that it is set in the standby mode and
can be reactivated later.
To set cruise control in standby mode:
–
Press the steering wheel button (2).
> The cruise control markings and symbols
in the driver display change colour from
WHITE to GREY – cruise control is now
temporarily deactivated and the driver
must then manually control the speed.
28
Cruise Control
29 Cruise Control