Volvo V90 2019, Owner'S Manual

Page: 150 / 674

LIGHTING
* Option/accessory. 148
Lighting control
The different lighting controls are used to control
both exterior and interior lighting. The left-hand
stalk switch activates and adjusts the exterior
lighting. The interior brightness is adjusted using
a thumbwheel on the instrument panel.
Headlamp levelling
1
is also adjusted using a
thumbwheel on the instrument panel.
Exterior lighting
Rotating ring in the left-hand stalk switch.
When the car's electrical system is in ignition
position
II , the following functions are available
for the rotating ring's different positions:
Position Specification
Daytime running lights.
Main beam flash can be used.
Daytime running lights and position
lamps.
Position lamps when the car is
parked.
A
Main beam flash can be used.
Dipped beam and position lamps.
Main beam can be activated.
Main beam flash can be used.
Position Specification
Daytime running lights and position
lamps in daylight.
Dipped beam and position lamps in
weak daylight or darkness, or when
the front fog lamp
*
and/or rear fog
lamp are activated.
The Active main beam function can
be activated.
Main beam can be activated when
dipped beam is switched on.
Main beam flash can be used.
Active main beam on/off.
A If the car is stationary but running, the rotating ring can be
moved to
position from another position to switch on
only the position lamps instead of other lighting.
Volvo recommends that mode is used
when the vehicle is driven.
1 Applies to vehicles with halogen headlamps.