98-100 ISSUE 8
38
identifier string will be displayed. If comms are not working, then an error message
will be displayed with information on what may be wrong.
Figure 17
Clicking on the Saturation curve tab while in Comms Set-up with the “Test Comms”
button pressed, will return you straight back to the screen shown in figure 17.
Step 3: Set up the bias current
Next, the minimum and maximum DC current needs to be specified along with the
number of steps and the number of bias units attached. The increment of each step
will be the difference between the maximum and minimum current, divided by the
number of steps minus 1.
Summary of Contents for dc1000
Page 1: ......
