98-100 ISSUE 8
33
Messages returned
The following messages will be returned:
The unit will respond with:
“D_STAT,0,
status
<cr> <lf>” where
status
is a single integer indicating the
status of the unit and any other unit attached.
If everything is OK, 0 or 1 will be returned. If not, then a status number will
be returned.
R
EAD THE
S
ERIAL
N
UMBER
Command
“D_SER? <lf> ”
Messages returned
The following will be returned
Serialnumber
<cr> <lf> where
serialnumber
is the serial number of the
DC1000 (Serial number returned will always be 12 digits, if the queried unit’s
serial number has less characters, then spaces will fill it out to 12.
G
ET THE NUMBER OF UNITS ATTACHED
Command
“D_COUNT? <lf>
Messages returned
The following will be returned within 5 seconds
“D_COUNT,xx <cr> <lf>” where
xx
is the number of DC1000s in the chain.
Summary of Contents for dc1000
Page 1: ......
