98-100 ISSUE 8
21
U
SING THE
DC1000
WITH A
V
OLTECH
AT3600
OR
AT
I
(
AND
O
PTIONAL
PC)
Fig. 9
Connect the
Auxiliary
port on your Voltech AT
i
or AT3600 to the
RS232 IN
port
on your DC1000 using the 9-way male to 9-way female straight-through RS232 cable
that was provided with your DC1000.
NOTE
: See the RS232 communications section for information on USB to RS232
converters.
If you wish to use a PC to control your AT36 when you have a DC1000 hooked up to
the auxiliary port, attach the PC’s RS232 connector to the DC1000’s RS232 OUT port
using the 9-way male to 9-way male straight-through RS232 cable that was provided
with your AT product. This setup will work with any communications software you
use (e.g. Voltech AT Editor Software, or Voltech DC1000 PC Software).
Summary of Contents for dc1000
Page 1: ......
