2
OPERATING CONDITIONS
Mod. PAGURO
6000/9000/14000/18000/6500/8500
Date: 12.03.2020_Rev: 0.0
3
NOTE: The external shock-absorbers supports already have holes for securing the generator to the boat.
A further solution to increase the dampening of vibrations is adding a plate between the generator and the
boat's mounting platform. This will also improve the sound insulation
This platform must have the following requirements:
-
At least 30 mm thick.
-
Its own weight is greater than 10 kg to behave like a mass in opposition to the vibrations induced by
the engine.
Anti-vibration supports on platform
The vibration dampers of the oscillating platform (not included in the scope of supply) must not be aligned with
the soft vibration dampers located under the generator. Depending on the available space, the greater the
distance between the vibration dampers, the better the result is.
Abnormal vibrations reveal mechanical problems (e.g. loose belts).
In this case you must intervene following the maintenance procedures described in this manual (see Chap. 10
“Maintenance”). If the phenomena continue, contact the manufacturer or the service centre listed in Chapter
“WARNINGS” immediately and
stop the generator from operating until the problem is resolved.
GENERATOR
PLATFORM
ANTI-VIBRATION
SUPPORT
SOFT ANTI-VIBRATION
SUPPORTS
GENERATOR
OSCILLATING
PLATFORM
BOATS
MOUNTING
PLATFORM
