2
OPERATING CONDITIONS
Mod. PAGURO
6000/9000/14000/18000/6500/8500
Date: 12.03.2020_Rev: 0.0
4
2.6 NOISE POWER EMISSION
The Paguro generator has been designed and manufactured to significantly reduce the sound power level. In
particular, the generator adopts a soundproofing capsule to limit the emission of the noise generated by the
internal endothermic engine
into the surrounding environment. The capsule is made of fiberglass and is
internally coated with sound-absorbing material.
Sound-absorbing coating– Internal lower side
The maximum sound pressure value detected during the various samplings is less than 70 dB (A).
In any case, the factors determining the exposure level include the duration of the exposure, the characteristics
of the installation point and other adjacent sources of noise.
Abnormal sounds reveal mechanical problems (e.g. loose belts).
In this case you must intervene following the maintenance procedures described in this manual (see Chap. 10
“MAINTENANCE”). If the phenomena continue, contact the Manufacturer or the service center listed in chapter
“WARNINGS” immediately and
stop the generator from operating until the problem is resolved.
