7
11.
Assemble the trim frame. The trim consists of a left (6) and right
(5) side piece and a split top piece (left #8, right #7). These
are joined by corner connectors (11-13) and two straight center
connectors (9-10). These slide into the channel on the back of
the frame and are secured with two set screws (13) in each
piece.
12. The trim slides over the surround assembly and is secured at the
base of each side with a machine screw.
13. The Surround Assembly is then slid over the appliance. Slots in
the two side panels accommodate the hood at the top of the
appliance (figure 6).
14. The surround assembly is held in place with two springs at the
top of either corner of the appliance (figure 6).
15. Connect power cord of blower to grounded receptacle.
16.
Firebrick extends the life of your stove and radiates heat more
evenly. If firebricks were removed to position appliance, replace
them before firing appliance. See figure 7 for proper orientation
and positioning. Install the back row first, then sides and finally
install bottom firebricks.
1
14
2
6
5
7
8
3
4
9
10
11
12
13
SURROUND ASSEMBLY
VIEW FROM BACK
SPRING
SURROUND
Slots in surround
slide of firebox top
Figure 6. Surround Installation
A
A A
A A
B B
B
B B
B
A A
A A
D
C
C
E
A
A A
A A
B B
B
B B
B
A A
A A
D
C
C
E
A
A A
A A
B B
B
B B
B
A A
A A
D
C
C
E
Firebrick Dimensions: (inches)
A
4.50” x 9.00”
B
3.33” x 9.00”
C
3.38” x 9.00”
D
2.25” x 9.00”
E
1.25” x 2.25”
Note: All Firebrick is 1.25” Thick
Figure 7a -
Back Firebrick Arrangement
Five (5) A-Size
Figure 7b -
Side Firebrick Arrangement
Six (6) B-Size
Figure 7c -
Bottom Firebrick Arrangement
Four (4) A-Size
Two (2) C-Size
One (1) D-Size
One (1) E-Size
CAUTION: RISK OF FIRE!
•
Replace firebricks before firing woodstove. Position firebricks
so no gaps remain between bricks.
• Never operate this appliance with missing or cracked
firebrick.
• Keep furnishings and other combustible materials away from
the stove and outside minimum clearances.
