1-10
Voice Mail Integration Programming
Voice Mail Integration Programming
DHS and DHS-E
Perform Steps 1-6 to configure the DHS with the
MiniVoice
system.
1. Enter System Programming as follows:
a.
Connect the single line adapter box to the system (make note of the
extension numbers).
b. Enter programming mode: [FEAT] + [#] + [
6
] + [000000].
c.
Press [SHOW].
2. Enter Stations as VM ports as follows:
a.
Press [NEXT] to go to the station area. Press [SHOW].
b. Enter the first station number on the keypad to be included as a VM
port, then press [SHOW].
c.
Press [NEXT] until the VM PORT entry is on the display.
d. Press [CHG] to mark VM PORT=Y.
e. Press [HOLD] to save the entry.
f.
Repeat this procedure for all stations to be entered as VM ports.
g. Press [HOLD] twice to save the entries and exit to System
Programming.
3. Assign VM Type to a Station Hunt Group as follows:
a.
Press [NEXT] until SYSTEM APPLICATION appears. Press [SHOW].
b. Press [SHOW] at the STATION HUNT GROUP entry.
c.
Enter [1] on the keypad and press [SHOW].
d. Press [CHG] to mark the group as a VM type. Press [NEXT].
e. Press [SHOW] at the GROUP MEMBER entry.
f.
Press [CHG], then enter the station number to be assigned in the group
and press [SAVE].
g. Repeat the procedure until all stations are entered in the group.
h. Press [HOLD] twice to save the entries and return to the STATION HUNT
GROUP screen.
