3. once you have reached the desired position, apply
the brakes (lever and knob, Figs. 3a and 3b) to fix the
angle.
4. return the probe to the starting position (0° posi-
tion) by centring the two red dots to the position
shown. If necessary, release the brakes first.
36
3 sET-UP AnD CoMMissioning
the "pretrigger" recording allows the recording of
events that took place a few seconds before the ac-
tual start of the video recording. this function is de-
activated by default. If you want to activate flashback
recording, read the following chapter:
l
4.1.1.2 CAPTURE sETTings, page 44
once you have configured the flashback recording
according to your wishes (0-30 seconds), start recor-
ding by pressing
the VucaM
®
now saves - according to your settings
- also the past 5-30 seconds before you have pressed
the video button.
the VucaM
®
has two handwheels that allow you full
control over the probe articulation.
1. turn the large handwheel to move the probe up
or down as desired.
2. turn the small handwheel to move the probe left
or right as desired.
4
1
2
3a
3b
or
3.4.1
FlAshbACk RECoRDing
3.5
PRobE ARTiCUlATion
