Transcendent NVR Series
79
Click “Edit Recipient” to go to the following interface.
Click “Add” and then input the recipient’s e-mail address in the popup window. Click “Add” in
the window to add the recipient. Click
to delete the recipient in the list. Click “Apply” to
save the settings. Click “Edit Sender” to go to the e-mail configuration interface of the sender.
11.1.5 UPnP Configuration
By UPnP you can access the NVR through IE client which is in WAN via router without port
mapping.
�
Click Start
à
Settings
à
Network
à
UPnP to go to the following interface.
�
Make sure the router supports UPnP function and the UPnP is enabled in the router.
Transcendent NVR Series
80
�
Set the NVR’s IP address, subnet mask and gateway and so on corresponding to the
router.
�
Check “Enable” in the interface as shown below and then click “Apply” button.
Click “Refresh” button to refresh the UPnP status. If the UPnP status were still “Invalid UPnP”
after refreshing it for many times, the port number would be wrong. Please change the mapping
type to “Manual” and then click
to modify the port until the UPnP status turns to “Valid
UPnP”. Refer to the following picture. You can view the external IP address of the NVR. Input
the external IP address plus port in the IE address bar to access the NVR such as
http://183.17.254.19:81.
11.1.6 NAT Configuration
Click Start
à
Settings
à
Network
à
NAT to go to the interface for NAT configuration. Check
“Enable” and then select the NAT server address (
nat.autonat.com
by default). Click “Apply”
to save the settings.
11.1.7 View Network Status
Click Start
à
Settings
à
Network
à
Network Status to view the network status or click
on
the tool bar at the bottom of the live preview interface to view network status conveniently.
11.2 Basic Configuration
11.2.1 Common Configuration
Click Start
à
Settings
à
System
à
Basic
à
General Settings to go to the following interface. Set
the device name, device No., language, video format and resolution. Enable or disable wizard,
“Log In Automatically” and “Log Out Automatically” (if checked, you can set the wait time).
Click “Apply” to save the settings.
