Transcendent NVR Series
39
Button/Parameter
Meaning
Click
/
to zoom in/out the image.
Focus Mode
If manual mode is selected, focus button & “One Key Focus” &
“Day/night mode switch autofocus” will be available; if auto mode is
selected, the time interval setup will be available.
Click
/
to increase/decrease the focal length.
Click to focus automatically .
Day/night mode
switch autofocus
If checked, the lens will focus automatically when the camera is switching
day/night mode.
Time Interval
It is the time interval when camera lens is auto-focusing. The interval can
be set in the drop-down list.
6
PTZ
6.1 PTZ Control Interface Introduction
Click
on the tool bar at the bottom of the live preview window to go to the PTZ control
interface as shown below. You can select another IP dome or PTZ IP camera on the top right of
the interface for PTZ control.
Introductions of the buttons on the bottom right of the interface:
Note: This function is only available for the models with auto varifocal lens, or the settings here
are ineffective
Transcendent NVR Series
40
Button
Meaning
Click
/
/
/
/
/
/
/
to rotate the dome. Click
to stop rotating the dome.
Click
/
to zoom in / out the camera image.
Click
/
to increase / decrease the focal length.
Click
/
to increase / decrease the iris of the dome.
Drag the slider to adjust the rotating speed of the dome.
/
Click
/
to start / stop recording.
/
Click
/
to hide / show the analog joystick.
Click it to return to the live preview interface.
Ø
Analog Joystick Control
The analog joystick on the left side of the interface provides quick PTZ control. The dome or
PTZ will rotate when you drag the analog joystick. The farther you drag the analog joystick
from the middle of the image, the faster the dome or PTZ rotates. The dome or PTZ will stop
rotating when you stop dragging the analog joystick.
Ø
3D Control
Click the camera image on any area and then the image will be centered on the clicked point.
Refer to the picture as shown below. Drag the mouse from A to B to get a green rectangle and
the rectangle area will be zoomed in.
