Vitek VT-TNR3216P Manual Download

Page: 8 / 104

Transcendent NVR Series

Support camera group view and scheme view in sequence, quick sequence view and dwell

time setting

Motion detection and video mask

P.T.Z. control protocol and setup of presets and cruises

Support single camera zoom by the scroll wheel of the mouse

Support any area of the image to be zoomed in to a maximum of 16 times of the current

size

Support image and lens adjustment (Camera dependent)

Disk Management

The NVRs with the 2U case can add a maximum of 8 SATA HDDs, a maximum of 2

SATA HDDs with the 1U case and a maximum of 1 SATA HDD with the small 1U case

Each SATA interface of the NVR support HDDs with max 8TB storage capacity

Some of the NVRs support recording to be backed up by e-SATA HDD

Support disk group configuration and management and each camera can be added into

different disk groups with different storage capacity

Support disk S.M.A.R.T Information

Support batch formatting of the HDD’s

Record Configuration

Main stream and sub stream recording at the same time and batch or single configuration

of the record stream

Manual and auto record modes

Schedule recording, sensor alarm recording and motion detection recording

Schedule recording and event recording setting with different record streams

Record schedule setting and recycle recording

Support pre recording and delay recording configuration of event recording

Record Playback

Record searching by thumbnail /time/event/tag

Thumbnail search by month, by day, by hour and by minute and time slice to be displayed

with camera

Maximum of 16 cameras to be searched by time

Event searching by manual/motion/sensor events

Tag searching by manually added tags

Instant playback of the selected camera in the live preview interface

16 camera playback

Support acceleration(maximum 32 times of the normal speed), deceleration (minimum

1/32 times of the normal speed) and 30s’ addition or reduction to current playing time

Record Backup

Support recording to be backed up through USB (U disk, mobile HDD) or e-SATA

interface

Support recording to be backed up by time/event/image searching

Support record cutting for backing up when playing back

Support a maximum of 10 backup tasks in background and backup status viewing

Summary of Contents for VT-TNR3216P









































































































Search results

Summary of Contents for VT-TNR3216P

Reviews:

Related manuals for VT-TNR3216P

Brands by name

Popular brands

Vitek VT-TNR3216P, Manual

Search results

Summary of Contents for VT-TNR3216P

Reviews:

Related manuals for VT-TNR3216P

Brands by name

Popular brands