Transcendent NVR Series
49
set day schedule or week schedule.
: add button;
: delete button.
Ø
Set Day Schedule
Click
and then drag the cursor on the time scale to set record time; click
and then
drag the cursor on the time scale to delete the selected area.
You can manually set the record start time and end time. Click
or
and then click
“Manual” on each day to pop up a window as shown below. Set the start and end time in the
window and then click “OK” to save the settings.
Click “All” to set all day recording; click “Reverse” to swap the selected and unselected time in
a day; click “Clear All” to clear all the selected area in a day.
Click “Copy To” to copy the schedule of the day to other days. Refer to the picture below.
Check the days in the window and then click “OK” to save the settings.
Ø
Set Week Schedule
Click
or
and then click “Manual” beside
to set the week schedule. Refer to
the picture below. Set the start and end time, check the days in the window and then click “OK”
to save the settings.
Transcendent NVR Series
50
Click “All” to set all week recording; click “Reverse” to swap the selected and unselected time
in a week; click “Clear All” to clear all the selected area in a week.
7.3.2 Record Schedule Configuration
Click Start
à
Settings
à
Record
à
Record Schedule
à
Schedule Configuration to go to the
interface as shown below. Set the schedule of sensor record, motion record and timed record.
Click “None” in the drop-down menu to clear the schedule. Click “Apply” to save the settings.
Go to “Edit Schedules” interface and then click
to edit the schedule. The settings of
“Edit Schedule” are similar to that of the “Add Schedule”. Click
to delete the schedule.
7.4 Record Mode
7.4.1 Manual Recording
Method One
: Click
on the tool bar at the bottom of the live preview interface to enable
recording of the camera.
Method Two
: Go to live preview interface and then right-click and select “Manually Record
On” in the camera window or click
on the tool bar under the camera window to start
recording.
Note: Click Start
à
Settings
à
Record
à
Mode Settings and then set the manual record time in the
interface. Click “Apply” to save the settings.
