Transcendent NVR Series
29
l
The IP camera which directly connects to the PoE port of the NVR through private
protocol will be shown automatically in the camera list.
l
One of the two conditions must be met if the IP camera which directly connects to the PoE
port of the NVR through ONVIF protocol should be shown automatically in the camera list.
ü
The IP camera which directly connects to the PoE port is in the same network segment
with the internal Ethernet port.
ü
The DHCP (obtain an IP address automatically) of the IP camera which directly
connects to the PoE port is enabled.
If the IP camera which connects to the PoE port cannot be displayed automatically in the
camera list, please refer to Q6 in Appendix A FAQ for details.
4.2 Add/Edit Camera Group
4.2.1 Add Camera Group
Click “Edit Camera Group” in the above interface to go to the interface as shown below.
Transcendent NVR Series
30
Click
to pop up the window as shown below. Set the group name and dwell time (the
dwell time of the camera group sequence view) in the window. Check the cameras and then
click “Add” to add group. Click
to view the cameras in the group after adding group.
4.2.2 Edit Camera Group
Click
to modify the group information such as group name and dwell time. Click
to delete the group.
5
Live Preview Introduction
5.1 Preview Interface Introduction
You should add cameras first after logging on to the system (see 4.1.1 Add Camera for details).
Refer to the interface as shown below, drag one camera in the preview window to another
window for camera window exchanging.