Transcendent NVR Series
25
The setup panel includes seven modules. Each module provides some function entries with
links for convenient operation.
Here we take
Camera
module as an example. The
Camera
module provides convenient links
such as “Add Camera”, “Edit Camera”, “Image Settings”, “Motion” and “PTZ”. Click
Camera
to go to the camera management interface as shown below.
There are some function items on the left side of the camera management interface. Click each
item to go to corresponding interface or window. For instance, click “Add Camera” to pop up
the window as shown below.
Transcendent NVR Series
26
Click the main menus on the top of the camera management interface to go to corresponding
interfaces. Refer to the picture below. For instance, you can go to system setup interface by
clicking “System” tag.
3.2.3 Main Functions
Ø
Camera
The module covers the functions such as
Camera Management
(see Chapter 4 Camera
Management for details),
Image Settings
(see 5.3 Preview Image Configuration for details),
Motion
(see 9.2.1 Motion Configuration for details) and
PTZ
(see Chapter 6 PTZ for details).
Ø
Record
The module covers the functions such as
Encode Parameters
and
Record Schedule
. Please see
Chapter 7 Record & Disk Management for details.
Ø
Disk
The module covers the functions such as
Disk Management
,
Storage Mode
and
Disk
Information
. Please see Chapter 7 Record & Disk Management for details.
Ø
Alarm
The module covers the functions such as
Sensor and Motion Alarm Handling
and
Alarm Out
Settings
. Please see Chapter 9 Alarm Management for details.
Ø
Network
The module covers the functions such as
TCP/IPv4
,
DDNS
,
Port
,
and
Network Status
.
Please see 11.1 Network Configuration for details.
Ø
Account and Authority
The module covers the functions such as
Account Management
(see 10.1 Account