Transcendent NVR Series
27
Management for details) and
Permission Management
(see 10.3 Permission Management for
details).
Ø
System
The module covers the functions such as
Basic Configuration
(see 11.2 Basic Configuration
for details),
Device Information
(see 11.7 View System Information for details),
Log
Information
(see 11.6 View Log for details) and
Configuration File Import&Export
(see 11.5
Backup and Restore for details).
4
Camera Management
4.1 Add/Edit Camera
4.1.1 Add Camera
The network of the NVR should be set before adding IP cameras (see 11.1.1 TCP/IPv4
Configuration for details).
Refer to the pictures below. Click
Add Camera
in the setup panel or
in the top right
corner of the preview window to pop up the “Add Camera” window as shown below. You can
quickly add or add the IP camera manually.
Ø
Quickly Add
Transcendent NVR Series
28
Check the cameras and then click “Add” to add cameras. Click
to edit the camera’s IP
address, username and password. Click “Default Password” to set the default username and
password of each camera.
Ø
Add Manually
Input the IP address, port, username and password of the camera and then select the protocol.
Click “Test” to test the effectiveness of the input information and then click “Add” button (you
can input one camera’s information or above such as IP address, username and password
before clicking “Add” button). Click
to delete the camera. Click “Default Password” to
set the default username and password of each camera.
4.1.2 Edit Camera
Click “Edit Camera” in the setup panel to go to the interface as shown below. Click
to
view the live image of the camera in a popup window. Click
to edit the camera (see
Add
camera
in 3.1Startup Wizard for details). Click
to delete the camera.
Note:
If you use the NVR with PoE network ports, the IP cameras (with PoE function) which directly
connect to the PoE port of the NVR will be displayed automatically in the camera list. Refer to
the picture below. The IP camera’s which occupies the PoE resource has a prefix shown before
its camera name. The prefix consists of PoE plus PoE port number. The IP cameras which
connect to the PoE ports cannot be deleted from the camera list manually.
