3
ENGLISH
СONVECTION FAN-HEATER
VT-2171 W/2172 W/2174 W
Convection fan-heater is intended only for addi-
tional heating of rooms. It is not meant for opera-
tion as main heating unit.
DESCRIPTION
1.
Support plates with wheels
2.
(Clamp) handle
3.
Power indicator “
POWER
”
4.
Temperature control knob “
MIN
/
MAX
”
5.
Operation mode switch “
I
/
O
/
II
”
(For model VT-2171 – “
I/O
”)
6.
Wall brackets
ATTENTION!
For additional protection it is reasonable to install
a residual current device (RCD) with nominal
operation current not exceeding 30 mA. To install
RCD contact a specialist.
SAFETY MEASURES
Before using the electrical unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as
specified in this manual. Mishandling of the unit
may lead to its breakage and cause harm to the
user or his/her damage to property.
•
Before using the unit for the first time, make
sure that the voltage in your mains corre-
sponds to the unit operating voltage.
•
The power cord is equipped with an “euro-
plug”; plug it into the socket with a reliable
grounding contact.
•
To avoid fire, do not use adapters for plug-
ging the unit in.
•
To avoid mains overloading, provide that no
other electrical appliances with high power
consumption are connected to the same out-
let the unit is connected to.
•
Do not place the unit directly under the mains
socket.
•
When mounting the unit on the wall, ensure
that the mains socket is below the level of the
unit and easy to access.
•
When mounting the unit on the wall, keep the
following gaps: between floor and unit – not
less than 15 cm, between front and upper pan-
els and objects – not less than 45 cm, between
side panels and objects – not less than 25 cm
(pic. 7).
•
To avoid burns avoid contact of open body
parts with hot surfaces.
•
Do not use the unit in bathrooms or in rooms
with high humidity.
•
Place the unit at a distance of not less than
1.5 meters from open flame and containers
filled with water.
•
Provide that no water gets on the unit body.
•
If any water gets on the unit body, unplug the
unit before touching it and only then wipe
water drops.
•
Do not use the unit outdoors or on wet surfaces.
•
Do not use the heater surface for drying wet
clothes, towels etc.
•
Make sure to use wheels when placing the unit
on the floor.
•
When using the support wheels, place the
unit on a flat stable surface. Before using the
unit make sure that the wheels are installed
properly.
•
Do not use the unit in the rooms where inflam-
mable substances are kept or used.
•
Do not use the unit, if the room temperature
is over +30C.
•
Do not leave the switched on unit when sleep-
ing and do not place it near a sleeping person.
•
Do not cover the unit during operation.
•
Avoid blocking of the openings of the unit with
any objects or room interior elements.
•
Do not insert any foreign objects into the unit
grid to avoid fire, injuries or unit damage.
•
Do not turn the unit over during its operation.
•
Before moving the unit, switch it off, pull the
plug out of the socket and let the unit cool
down completely.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
•
Attention!
Do not allow children to play with
polyethylene bags or packaging film.
Danger
of suffocation!
•
Do not leave children unattended to prevent
using the unit as a toy.
•
Close supervision is necessary when the unit
is used near children or disabled persons.
•
Keep the unit out of reach of children and dis-
abled persons.
•
This unit is not intended for usage by children.
Place the unit out of reach of children during
the operation and cooling down.
•
The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience
or knowledge if they are not under supervision
of a person who is responsible for their safety
IM VT-2171.indd 3
23.06.2016 14:23:12
