3
ENGLISH
HEATER VT-2167 W
DESCRIPTION
1.
Power switch «
ON/OFF
»
2.
Control panel
3.
Display
4.
Wall bracket loops
5.
Plate for wheel mounting
6.
Support wheel
7.
Limit stops
8.
Lock
9.
Wall bracket
10.
Timer setting button «
TIMER
»
11.
Operation mode selection button «
MODE
»
12.
Time and temperature setting button
13.
Standby On/Off button
ATTENTION!
For additional protection it is reasonable to install
a residual current device (RCD) with nominal
operation current not exceeding 30 mA. To install
RCD contact a specialist.
SAFETY MEASURES
Read these instructions carefully before using
the unit and keep it for the whole operation
period.
•
Use the unit for intended purposes only, as
specified in this manual.
•
Before using the unit for the first time, make
sure that the voltage in your mains corre-
sponds to the unit operating voltage.
•
The power cord is equipped with an “euro-
plug”; plug it into the socket with a reliable
grounding contact.
•
To avoid fire, do not use adapters for plug-
ging the unit in.
•
To avoid mains overloading, provide that no
other electrical appliances with high power
consumption are connected to the same out-
let the unit is connected to.
•
When mounting the unit on the wall, ensure
that the mains socket is below the unit and
easy to access.
•
When mounting the unit on the wall, keep the
following gaps: between floor and unit – not
less than 15 cm, between front and upper pan-
els and objects – not less than 50 cm, between
side panels and objects – not less than 10 cm.
•
To avoid burns avoid contact of open body
parts with hot surfaces.
•
Do not use the unit in bathrooms or in rooms
with high humidity.
•
Place the unit at a distance of not less than
1,5 meters from open flame and containers
filled with water.
•
Provide that water does not get on the unit
body.
•
If any water gets on the unit body, unplug it
before touching and only then wipe water
drops.
•
Do not use the unit outdoors.
•
When using the wheels, place the unit on a flat
stable surface.
•
Do not use the unit in the rooms where inflam-
mable substances are kept or used.
•
Do not switch the unit on when sleeping and to
not place it near the sleeping person.
•
Do not cover the unit during operation.
•
Avoid blocking of the openings of the unit with
any objects or room interior elements.
•
Do not insert any foreign objects into the unit
grids to avoid injuries or unit damage.
•
Do not turn the unit over during its operation.
•
Before moving the unit, switch it off, pull the
plug out of the socket and let the unit cool
down completely.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unat-
tended.
•
ATTENTION!
Do not allow children to play
with polyethylene bags or packaging film.
Danger of suffocation!
•
Do not allow children to use the unit as a toy.
•
Close supervision is necessary when the
unit is used near children or disabled per-
sons.
•
This unit is not intended for usage by children
or disabled persons, unless they are given all
the necessary and understandable instruc-
tions by a person who is responsible for their
safety on safety measures and information
about danger that can be caused by improper
usage of the unit.
•
Do not leave the operating unit unattended.
•
Unplug the unit if it is not being used and
before cleaning.
•
When unplugging the unit, pull the plug but
not cord.
•
Do not touch the power plug with wet hands.
•
Provide that the power cord does not contact
with hot surfaces and sharp furniture edges.
VT-2167.indd 3
13.07.2015 10:34:30
