manualshive.com logo in svg

Vitek Transcendent VTC-TNB8RFA3-2, Manual

Share
Download
Vitek Transcendent VTC-TNB8RFA3-2 Manual Download Page 54

 

 

48 

Network Camera User Manual

 

  “rtsp://IP address: rtsp port/profile3?transportmode=mcast”. 

Audio

: Having entered the main/sub stream in a VLC player, the video and audio will play 

automatically. 
If “Allow anonymous login…” is checked, there is no need to enter the username and password 
to view the video. 
If “auto start” is enabled, the multicast received data should be added into a VLC player to play 
the video. 
 

Note

:1. This camera support local play through a VLC player. Enter the RTSP address (unicast 

or multicast, eg. rtsp://192.168.226.201:554/profile1?transportmode=mcast) in a VLC player 
to realize the simultaneous play with the web client. 

2. The IP address mentioned above cannot be the address of IPv6. 
3. Avoid the use of the same multicast address in the same local network. 
4. When playing the video through the multicast streams in a VLC player, please pay 

attention to the mode of the VLC player. If it is set to TCP mode, the video cannot be played. 

5. If the coding format of the video of the mainstream  is MJPEG, the video may be 

jumbled at some resolutions. 

 

4.6.8

 

UPNP 

If this function is enabled, the camera can be quickly accessed through the LAN. 
Go to Config

→

Network

→

UPnP. Enable UPNP and then enter UPnP name. 

 

 

 

4.6.9

 

Email 

If you need to trigger Email when an alarm happens or IP address is changed, please set the 
Email here first.   
Go to Config

→

Network 

→

Email. 

 

Summary of Contents for Transcendent VTC-TNB8RFA3-2















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands