12
Network Camera User Manual
4.1.3
Local Config
Go to Config
→
System
→
Local Config to set up the storage path of captured pictures and
recorded videos on the local PC. There is also an option to enable or disable the bitrate display
in the recorded files.
Additionally, “Local smart snapshot storage” can be enabled or disabled here. If enabled, the
captured pictures triggered by smart events (like line crossing detection, region intrusion, etc.)
will be saved to the local PC.
4.1.4
Storage
Go to Config
→
System
→
Storage to go to the interface as shown below.
13
Network Camera User Manual
⚫
SD Card Management
Click the “Format” button to format the SD card. All data will be cleared by clicking this button.
Click the “Eject” button to stop writing data to SD card. Then the SD card can be ejected safely.
Snapshot Quota
: Set the capacity proportion of captured pictures on the SD card.
Video Quota
: Set the capacity proportion of record files on the SD card.
⚫
Schedule Recording Settings
1.
Go to Config
→
System
→
Storage
→
Record to go to the interface as shown below.
2.
Set record stream, pre-record time, cycle writing.
Pre Record Time
: Set the time to record before the actual recording begins.
3.
Set schedule recording.
C
heck “Enable Schedule Record” and set the schedule.
Weekly schedule
Set the alarm time from Sunday to Saturday for a single week. Each day is divided in to one-
hour increments. Green means scheduled. Blank means unscheduled.
Summary of Contents for Transcendent VTC-TNB8RFA3-2
Page 2: ......
