![Vitek Transcendent VTC-TNB8RFA3-2 Manual Download Page 11](http://html1.mh-extra.com/html/vitek/transcendent-vtc-tnb8rfa3-2/transcendent-vtc-tnb8rfa3-2_manual_1035795011.webp)
4
Network Camera User Manual
The system will pop up the above-mentioned textbox to ask you to change the default password.
It is strongly recommended to change the default password for account security. If “Do not
show again” is checked, the textbox will not appear next time.
2.1.2
Directly Access through IE
The default network settings are as shown below:
IP address:
192.168.226.201
Subnet Mask:
255.255.255.0
Gateway:
192.168.226.1
HTTP:
80
Data port:
9008
Use the above default settings when logging into the camera for the first time. Directly connect
the camera to the computer through network cable.
1) Manually set the IP address of the PC and the network segment should be as the same as the
default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window (actual pop-up may differ depending on your
computer’s operating system).
5
Network Camera User Manual
Select “Properties” and then select internet protocol according to the actual situation (for
example: IPv4). Next, click the “Properties” button to set the network of the PC.
2) Open the IE browser and enter the default address of IP-CAM and confirm.
3) Follow directions to download and install the Active X control.
4) Enter the default username and password in the login window and then enter to view.
2.2
WAN
➢
Access through the router or virtual server
Summary of Contents for Transcendent VTC-TNB8RFA3-2
Page 2: ......