14
Network Camera User Manual
“Add”: Add the schedule for a special day. Drag the mouse to set the time on the timeline.
“Erase”: Delete the schedule. Drag the mouse to erase the time on the timeline.
Manual Input: Click it for a specific day to enter specific start and end times.
Day schedule
Set the alarm time for alarm on a special day, such as a holiday.
Note: Holiday schedule takes priority over weekly schedule.
⚫
Snapshot Settings
Go to Config
→
System
→
Storage
→
Snapshot to go to the interface as shown below.
Set the format, resolution and quality of the image saved on the SD card and the snapshot
interval and quantity and the timing snapshot here.
Snapshot Quantity
: The number you set here is the maximum quantity of snapshots. The actual
quantity of snapshots may be less than this number. Supposing the occurrence time of an alarm
event is less than the time of capturing pictures, the actual quantity of snapshots is less than the
set quantity of snapshots.
Timing Snapshot
: Enable timing snapshot first and then set the snapshot interval and schedule.
The setup steps of schedule are the same as the schedule recording (See
Schedule Recording
).
4.2
Image Configuration
Image Configuration includes Display, Video/Audio, OSD, Video Mask and ROI Config.
15
Network Camera User Manual
4.2.1
Display Configuration
Go to Image
→
Display interface as shown below. The image’s brightness, contrast, hue and
saturation etc. for common, day and night mode can be set up separately. The image effect can
be quickly seen by switching the configuration file.
Brightness
: Set the brightness level of the camera’s image.
Contrast
: Set the color difference between the brightest and darkest parts.
Hue
: Set the total color degree of the image.
Saturation
: Set the degree of color purity. The purer the color, the brighter the image is.
Sharpness
: Set the resolution level of the image plane and the sharpness level of the image
edge.
Noise Reduction
: Decrease the noise and make the image more detailed. Increasing the value
will make the noise reduction effect better but it will reduce the image resolution.
Defog:
Activating
this function and setting an appropriate value as needed in foggy, dusty,
smoggy or rainy environment to get clearer images.
Lens Distortion Correction:
When the image appears distorted to some extent, please enable
this function and adjust the level according to the actual scene to correct the distortion. (Only
some version may support this function. If your camera doesn’t support it, please skip this
Summary of Contents for Transcendent VTC-TNB8RFA3-2
Page 2: ......
