20
Network Camera User Manual
To set up video mask:
1. Enable video mask.
2. Click the “Draw Area” button and then drag the mouse to draw the video mask area.
3. Click the “Save” button to save the settings.
4. Return to live to verify that the area has been drawn as shown as blocked out in the image.
To clear the video mask:
Click the “Clear” button to delete the current video mask area.
4.2.5
ROI Configuration
Go to Image
→
ROI Config interface as shown below. An area in the image can be set as a region
21
Network Camera User Manual
of interest. This area will have a higher bitrate than the rest of the image, resulting in better
image quality for the identified area.
1. Check “Enable” and then click the “Draw Area” button.
2. Drag the mouse to set the ROI area.
3. Set the level.
4. Click the “Save” button to save the settings.
4.2.6
Lens Control
This function is only available for the model with motorized zoom lens.
Within this section,
zoom and focus can be controlled. If the image is out of focus after a manual adjustment, one
key focus can be used to set the focus automatically. Go to Config
→
Image
→
Zoom/Focus
interface to set.
Summary of Contents for Transcendent VTC-TNB8RFA3-2
Page 2: ......
