VITEK VTC-TNB2LPR
32
type will be displayed under the license plate number. Click the matched license plate picture, the
matched details will pop up as shown below.
※
※
Configuration requirements of camera and surrounding area
l
The monitoring image should try to cover the lane, entering/exiting vehicles and these
vehicles’ plate number should be always seen in the video.
l
Try to avoid objects that will block the camera, such as pillars, obstacles, doors, etc.
l
Avoid scenes with many trees or other moving objects (like humans, non-motor vehicles).
l
The monitored road should be straight within 165 feet in front of/behind the location of the
camera installation and make sure the camera points at the front or rear of the vehicle.
Crossroad monitoring:
l
The installation height (H) should range from 14.5’ to 19.5’.
l
The distance D (between the location of the camera installation and the captured area) should
range from 50’ to 80’. This distance (D) depends on the installation height, usually 3 or 4
times as far as the installation height (H).
l
The distance of the captured area (L) should be from 50’ to 65’.